Troubleshooting - Onkyo DV-SP302 Instruction Manual

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service. Refer also to the respective
instruction manuals of the connected components and TV.
DVD Player
Symptoms Causes
The DVD Player doesn't • The power cord is disconnected.
switch on. • The main power is set to OFF.
• There is external noise in the computer
circuits of the DVD Player.
• The AC fuse is blown.
The DVD Player doesn't • No disc is inserted.
start playback. • The region number of the disc does not
match that of the DVD Player.
• An unplayable disc is inserted.
• The disc is placed upside down.
• The disc is not placed within the disc tray
guide.
• The disc is dirty.
• The parental lock function is activated.
Brightness is unstable or • Copy protection is activated.
noise is visible on the
playback picture.
• The TV is not compatible with progressive
scan signal.
• You attempt to view the PAL disc in a
NTSC compatible TV or to view the NTSC
disc in a PAL compatible TV.
The playback picture is • The disc is dirty.
occasionally distorted. • It is in fast forward or fast reverse playback.
• The disc does not meet the standard.
Playback doesn't follow • The DVD Player is in repeat playback
the course of the disc's mode, memory playback mode, or random
programs. playback mode, etc.
The picture from the • The TV is not set to the DVD Player's input.
DVD Player doesn't • The DVD Player is not properly connected.
appear on the TV • While in the progressive mode, the signal
screen. will not be output from the composite and
S-video terminals.
No sound or inaccurate • A wrong sound signal conversion method
sound is reproduced. (DIGITAL OUT) is selected.
• The TV is not set to the DVD Player's input.
• The DVD Player is not properly connected.
• The system is in fast forward, rewind or
slow motion play mode.
• The disc does not meet the standard.
The buttons on the remote • Power supply fluctuations or other
controller and DVD abnormalities such as static electricity may
Player do not operate. interrupt correct operation.
Remedies
• Check the connection of the power cord.
• Turn on the main power.
• Switch off the main power, then switch it on
again. If not recovered, disconnect the power
cord, then connect it again.
• Contact your nearest Onkyo service center.
• Open the disc tray and insert a disc.
• See Regional Restriction Codes (Region
Number) on the rear panel.
• Check the playable discs.
• Place the disc with the playback side down.
• Place the disc within the proper guide on the disc
tray.
• Eject the disc and clean it.
• Deactivate the parental lock function or change
the parental lock level.
• Connect the DVD Player directly to the TV.
Avoid connecting the DVD Player to the TV
through a VCR.
• Press PROGRESSIVE to restore the Interlace
mode.
• Select the PAL or NTSC format in the setting
menu under Preferences and play a disc
compatible with the format set for the DV-SP302.
• Eject the disc and clean it.
• Sometimes a small amount of picture distortion
may appear. This is not a malfunction.
• See "Notes on Discs."
• Resume normal playback.
• Set the TV to the DVD Player's input.
• Check the connections to the DVD Player.
• Press the PROGRESSIVE button to switch to the
interlace mode, or connect the TV that supports
the progressive format using the COMPONENT
terminals.
• Check the current sound signal conversion
method, and select the right setting for
"DIGITAL OUT."
• Set the TV to the DVD Player's input.
• Check the connections to the DVD Player.
• Resume nomal playback.
• See "Notes on Discs."
• Switch off the main power, then switch it on
again. If not recovered, disconnect the power
cord, then connect it again.
Pages
17
17
17
-
18
4
6, 7
18
18
8
31
14-15
28
30
8
-
6-8
22-26
-
14-16
28
29
-
14-16
19
6-8
17
33