Table of Contents
Advertisement
Making Connections
Connecting to an Amplifier
(To enjoy the sound advantages of the DVD Player)
Although you can reproduce the DVD Player's sound from the TV speakers with the connections on page 15, connecting to an amplifier
provides you with higher quality dynamic sounds.
To reproduce Dolby Digital surround and DTS surround sound, you need to connect to an amplifier with a Dolby Digital and DTS decoder,
respectively.
About
When connected with an Onkyo amplifier via
amplifier.
• The function of the upper and lower
• Connecting only the
phono cables as well.
I Digital connection
If your amplifier has a digital input jack, be sure to connect it to
either DIGITAL OUTPUT OPTICAL or COAXIAL jack on the
DVD Player.
Note
In the Digital Out setting (page 29), you can select whether the
DV-SP302 will output the PCM signal only, the PCM and other
signals, or no digital signals at all.
To use
function:
When you make
Onkyo's amplifier, be sure to make analog connections as well.
AUDIO OUTPUT
DIGITAL
OPTICAL COAXIAL
OPTICAL COAXIAL
DIGITAL
AUDIO INPUT
16
, your DV-SP302 can be controlled using the remote controller supplied with the
connectors are the same. Connect to either one.
cable does not make the system operational. You must also connect the analog RCA/
connection between the DV-SP302 and
VIDEO OUTPUT
COMPONENT
AUDIO OUTPUT
P
R
DIGITAL
ANALOG
VIDEO
OPTICAL
COAXIAL
L
P
B
R
Y
S VIDEO
Connect one or the other
Amplifier or
Receiver
I Analog connection
(necessary for
If your amplifier has no digital audio input, or when you use
function, make the analog connection.
AUDIO OUTPUT
ANALOG
\
REMOTE
CONTROL
AUDIO INPUT
ANALOG
function)
VIDEO OUTPUT
COMPONENT
AUDIO OUTPUT
P
R
DIGITAL
ANALOG
VIDEO
OPTICAL
COAXIAL
L
P
B
L
R
Y
S VIDEO
R
L
Amplifier or
Receiver
R
REMOTE
REMOTE
CONTROL
CONTROL
Advertisement
Table of Contents
