Table of Contents
Advertisement
Removing the Mower Deck
1. Park the machine on a level surface and disengage the
blade-control switch.
2. Set the parking brake, stop the engine, remove the key,
and wait for all moving parts to stop before leaving the
operating position.
3. Lower the height-of-cut lever to the lowest position.
4. Remove the hairpin cotter from the front support rod,
and remove the rod from the deck bracket
54). Carefully lower the front of the mower deck to
the ground.
3
1. Front support rod
2. Locking nut
(Figure
2
1
G014635
Figure 54
3. Deck bracket
5. Lift the mower deck and hanger brackets clear of the
rear lift rod, and lower the mower carefully to the
ground
(Figure
2
2
1
1. Mower deck
2. Hanger bracket
6. Slide the mower deck rearward to remove the mower
belt from the engine pulley.
7. Slide the mower deck out from underneath the
machine.
Note: Retain all parts for future installation.
43
55).
2
2
3
3
G015338
Figure 55
3. Rear lift rod
Advertisement
Table of Contents
