Maintenance And Security; Replacing The Projection Lamp - promethean UST-P1 Owner's Manual

Replacing the Projection Lamp

The projection lamp should be replaced when it burns out. It should only be replaced with a certified
replacement part, which you can order from your local dealer.
Important:
a. The projection lamp used in this product contains a small amount of mercury.
b. Do not dispose this product with general household waste.
c. Disposal of this product must be carried out in accordance with the regulations of your local
authority.
Warning:
Be sure to turn off and unplug the projector at least 30 minutes before replacing the lamp. Failure to
do so could result in a severe burn.
1.
Remove the single screw
on the lamp compartment
cover.
2.
Remove the lamp
compartment cover.
Promethean, Company Confidential
M
AINTENANCE AND
S
ECURITY
40