Advanced Feature - promethean UST-P1 Owner's Manual

Advanced Feature

Press the Menu button to open the OSD menu. Press ◄► to move to the Installation II menu.
Press ▲▼ to move to the Advanced menu and then press Enter or ►. Press ▲▼ to move up and
down in the Advanced menu. Press ◄► to change values for setting.
I
TEM
OSD Menu Setting
Peripheral Test
Lamp Hour Reset
Low Power Mode
3D
RS232
Network
Note:
To enjoy the 3D function, first enable the Play Movie in 3D setting found in your DVD
device under the 3D Disc Menu.
Promethean, Company Confidential
Press (Enter) / ► to enter the OSD setting menu. See page 28 for more
information on OSD Menu Setting.
Press (Enter) / ► to enter the Peripheral Test menu. See page 28 for more
information on Peripheral Test.
After replacing the lamp, this item should be reset. See page 29 for more information
on Lamp Hour Reset.
Press ◄► to turn Low Power Mode on or off.
Press (Enter) / ► to enter the 3D menu. See page 29 for more information on 3D
settings.
Press ◄► to select RS232 (remote) or Network (LAN) mode depending on projector
connection method.
Press (Enter) / ► to enter the Network menu. See page 30 for more information on
Network settings.
D
ESCRIPTION
27