Recall Mode; Dialling Mode - Motorola AC1000 User Manual

are not dialling from the phonebook/call list/redial list). This allows you to make calls to
other switchboard extensions.
1. Press Menu, scroll
2. Set Handset is highlighted. Press Select.
d
3. Scroll to PBX Access Code
d
u
4. Scroll or to Off,
If you select Set Code, enter the switchboard access code e.g. 9 then press Save.
e
5. Press to return to standby.
8.5

Recall mode

Recall is useful to access certain network services and PABX / switchboard services.
The default recall mode preset in the AC1000 is suitable for your country network and
therefore you should not need to change it.
NOTE
The use of the AC1000 cannot be guaranteed on all PABX.
1. Press Menu, scroll
d
2. Scroll to Set Base
d
3. Scroll to Recall Mode
d
u
4. Scroll or to Recall 1
e
5. Press to return to standby.
8.6

Dialling mode

The AC1000 is preset to Tone dialling. It is unlikely that you need to change this setting.
1. Press Menu, scroll
d
2. Scroll to Set Base
d
3. Scroll to Dialling Mode
d
u
4. Scroll or to Pulse
e
5. Press to return to standby.
Base settings
d
to Settings and press Select.
and press Select.
On or Set Code then press Select.
d
to Settings and press Select.
and press Select.
and press Select.
or Recall 2 and press Select.
d
to Settings and press Select.
and press Select.
and press Select.
or Tone and press Select.
31