8.7
Change the System PIN
The System PIN is required when changing certain settings and for registration / de-
registration. The default setting is 0000. You can change this to your own preferred number
(up to 8 digits).
When you enter a PIN, the digits are shown as ****.
1. Press Menu, scroll
d
2. Scroll
to
Set Base
d
3. Scroll
to
System PIN
4. Enter the old PIN (Default setting = 0000) and press OK.
5. Enter the new PIN and press OK.
6. Re-enter the new PIN and press OK.
e
7. Press
to return to standby.
NOTE
It is advisable to make a note of your new PIN code and keep it
somewhere safe.
8.8
Restore default settings
You can restore the AC1000 to its default (original) settings. Resetting the AC1000 will not
affect the phonebook or Calls list, and all cordless audio conferencing units registered to
the base will be retained. Only the cordless audio conferencing unit and base settings will
be reset.
1. Press Menu, scroll
d
2. Scroll
to
Set Base
d
3. Scroll
to
Master Reset
4. Select
Yes
to confirm or
5. The display will show
8.9
Registration
Up to 5 cordless audio conferencing units can be registered to one base station. Additional
cordless audio conferencing units must be registered to the base before you can use them.
•
The instructions described below apply specifically to the AC1000 cordless audio
conferencing unit. If you wish to register another manufacturer's cordless audio
conferencing unit, the instructions may vary. In this case, please refer to the instruction
manual of the additional cordless audio conferencing unit.
•
The System PIN is required to register or deregister cordless audio conferencing units.
The default PIN is 0000.
32
d
to
Settings
and press Select.
and press Select.
and press Select.
d
to
Settings
and press Select.
and press Select.
and press Select.
No
to cancel.
Reset Complete
and the unit will restart automatically.
Base settings