NEC UNIVERGE SV9100 DT750 User Manual page 56

FILE NAME Directory.csv (Fixed)
CODE Unicode (UTF-8)
When changing the file name, refer to
page 46.
When not changing the file name, refer to
on page 47.
22. Press BK softkey once to delete the default file
name and then enter a new file name by using
the digit keys.
For details on character entry method, see
Characters on page
A maximum of 20 characters ("0-9", "A-Z", "a-z", "*",
"#", ".", "-" or "_") can be entered as a file name.
To delete an entered character, press BK softkey.
23. Press or Exec softkey to start the
downloading process. While downloading a file,
the LCD displays "Downloading..." first and then
"Saving...".
Be sure not to turn OFF the DT750 while "Saving..." is
displayed on the LCD.
24. After the downloading process is complete, the
display changes as follows:
Step 20. on
Step 21.
How to Input
68.
Download Complete!
Press Exit to Reset.
25. Reset the DT750 by pressing Exit softkey.
When the downloading process ends in failure,
"Downloading Failed!" is displayed on the LCD. Check
to see the following and then make a retry.
CHECK POINTS
Download file is not placed
in the specified directory.
A different file name is
specified between DT750
and FTP/TFTP server.
Incorrect IP address of FTP/
TFTP server has been
entered from the telephone.
The power to FTP/TFTP
server or network equipment
is OFF.
LAN cable is disconnected.
48
Exit
ACTIONS
Place the download file in
the specified directory.
Set the same file name from
both DT750 and FTP/TFTP
server.
Set the proper IP address of
FTP/TFTP server.
Turn on the power.
Reconnect the cable
securely.