Softkeys - NEC UNIVERGE SV9100 DT750 User Manual

1.

Softkeys

The softkeys on DT750 provide a set of functions
on the LCD that adapts to the changing state of the
telephone. While default softkey settings are
provided, desired functions can be assigned to
individual stations as required. The softkeys, at
the bottom of the LCD, can display the names of
available functions, names of user-assigned
functions and names of functions assigned by a
specific softkey pattern. Displayed softkeys can
vary, depending on the state of the phone and/or
when the Next/Previous button is pressed.
For example, when an incoming call is terminated
to a line key on Page 3 while Page 1 is being
displayed on the screen, the screen is not
automatically switched from Page 1 to Page 3.
The user must display Page 3 manually and then
answer the incoming call.
2-12 THU 8:19AM
2200
List
Exit
Exit Key
Press to exit from the Menu or Help mode and go
back to the time display.
J. Jones
Dir
VMsg

Help
Help Key
Press the Help Key, then desired programmable
key for helpful information about that key.
List
Press the List key to access Call History. Press
Redial to access previously dialed calls, or press
CID to access previously received calls. Use the
arrows to scroll through the list and press Speaker
to dial the selected number.
Dir
Press Dir to access Directory Dialing. Press the
SPD softkey for Common Speed Dials, Press the
EXT. softkey for extension list, or Press STA
softkey for station Speed Dials. Press the TELBK
for the Telephone Book. Press the up or down
arrow soft keys to scroll through each list and
Press the Dial soft key to dial the selected number.
VMsg
Press the VMsg softkey to access the Voice
messaging system.
ICM
Press the ICM softkey for Paging, Call Pickup, and
Barge in.
Prog
Press the Prog softkey to program Call
Forwarding, Do Not Disturb, Speed Dials,
Telephonebook, Function Keys, Live Monitor, and
Languages.
11