Recording - Onkyo DR-815 Instruction Manual

Recording

The copyright laws prohibit using your recordings without consent of the copyright owner, except for the purpose of
your personal entertainment.
1 Press INPUT on the DVD receiver or the remote controller to select the recording
source component.
DVD receiver
Remote
controller
2
Prepare the recording component.
• Place the recording component in record standby mode.
• Adjust the recording level on the recording component.
3 Start recording.
• Start playing the source component selected in Step 1.
Notes:
• Do not change the input selection during recording. Otherwise, the recording cannot be made
correctly.
• Set the input source (page 28) to perform Synchro recording, or other system recording using
Onkyo components that feature the
• Select STEREO for the listening mode, when you record in analog form the signals from the
built-in DVD.
• The recording level differs depending on the individual sources; you should adjust the level on
the recording device.
78
1
1
connector.