Using The Sleep Timer - Onkyo DR-815 Instruction Manual

Using the Timer Functions —Continued

Using the Sleep Timer

Using the remote controller
The Sleep timer can be set for 10 to 90 minutes, in inter-
vals of 10 minutes.
Press SLEEP.
"Sleep 90" appears in the display, indi-
cating the unit will turn off in 90 minutes.
Each press of the same button reduces
the remaining time by 10 minutes.
SLEEP
Press cursor
remaining time in one-minute incre-
ments.
If you have finished the sleep time set-
ting, press ENTER.
Checking the Remaining Time
Press SLEEP while the Sleep timer is on. If you press
SLEEP while the remaining time is displayed, the
remaining time is reduced by 10 minutes.
Canceling Sleep Timer
Press SLEEP repeatedly until "Sleep Off" appears in the
display.
62
SLEEP
/ if you wish to set the
Using the unit
You can set the Sleep timer for 10 to 90 minutes, in inter-
vals of 10 minutes. It is also possible to set the timer from
1 to 99 in one-minute increments is also possible using
MULTI JOG.
Display
1
Press and hold TIMER for more
than 1 second.
"Sleep 90" appears in the display win-
dow. The unit will turn off in 90 minutes.
2 Press TIMER if you wish to reduce
the remaining time.
Each press reduces the remaining time
by ten minutes:
90 → 80 → ... → 10 → off.
SLEEP
3 Turn MULTI JOG if you wish to set
the remaining time in one-minute
increments.
Turn MULTI JOG clockwise to increase
the remaining time by up to 99 minutes,
or counterclockwise to decrease the
remaining time to one minute.
SLEEP
4 Press MULTI JOG.
The Sleep timer starts operating.
The SLEEP indicator lights.
1, 2
3, 4