Brief Description; System Components For All Systems - Daikin EKSV21P Installation Manual

2 x Product description
2.2

Brief description

The Solar system is a thermal solar system for hot water generation and heating support.
The system consists of several, mainly pre-assembled, modules. Plug-in technology and a high degree of pre-assembly ensure fast
and simple system installation.
Unless specified otherwise, the components are not included in the scope of delivery and need to be ordered separately.
Electronic control
The fully-electronic Solar system R3 controller ensures optimum solar heat exploitation (hot water heating, heating support) and
compliance with all operational safety aspects. All parameters needed for trouble-free operation have been preset at factory.
2.3

System components for all systems

High performance flat solar panels
EKSV21P
– H x W x T: 2000 x 1006 x 85 mm, weight: approx. 35 kg
EKSV26P
– H x W x T: 2000 x 1300 x 85 mm, weight: approx. 42 kg
EKSH26P
– H x W x T: 1300 x 2000 x 85 mm, weight: approx. 42 kg
Solar panel mounting rails FIX-MP
FIX-MP100
– for a EKSV21P flat solar panel
FIX-MP130
– for a EKSV26P flat solar panel
FIX-MP200
– for a EKSH26P flat solar panel
Consists of:
– 2x mounting profile rail
– 2x solar panel securing hooks
Installation instructions
8
The unpressurised system (drain back) must only be operated with the regulation and pump unit EKSRPS3,
the air-to-water heat pump EKHBRD*, the hot water storage tanks EKHWP* and the relevant components
(chapter 2.3 and 2.4).
The pressurised system must only be operated with the pump unit EKSR3PA, the pressure station
EKSRDS1A, the plate heat exchanger EKSRPWT1, with the heat pump EKHBH* or EKHBX*, the solar connection
kit EKSOL, the hot water storage tanks EKHWE/EKHWS and the relevant components (chapter 2.3 and 2.5).
B
H
EKSV21P
EKSV26P
T
Fig. 2-2 Flat solar panel
Fig. 2-3 FIX-MP
B
H
EKSH26P
EKSV21P/EKSV26P/EKSH26P
Solar panels on-roof installation
008.1618444_00 – 12/2012