Installation; Transport And Storage; Scope Of Delivery; Transport - Daikin EKSV21P Installation Manual

3.1

Transport and storage

3

Installation

3.1.1 Scope of delivery

– The unpressurised DAIKIN Solar system system
unit EKSRPS3, roof transitions, connecting lines and installation materials.
– The DAIKIN Solar system pressure system
EKSR3PA/EKSRDS1A, pressure station, plate heat exchanger, connecting lines and installation materials.
– The installation instructions for the Solar panels on-roof installation of the flat solar panels is included with the roof break-
through package.

3.1.2 Transport

The DAIKIN flat solar panels are delivered on a pallet, wrapped in film All industrial trucks, such as lifting trucks and forklift
trucks, are suitable for transporting it. Other DAIKIN Solar system components are supplied packed separately.

3.1.3 Storage

When storing the components of the DAIKIN Solar system you must take account of the following:
• All components should be stored in dry and frost-protected rooms only.
• Dismantled hydraulic components must be completely drained before being stored.
• Components must not be stored until they have cooled down.
• Current-carrying components must be permanently isolated from the power supply before storage (switch off fuses and main
switches, remove cables) and must be secured against inadvertent restarting.
• The components must be stored in such a way that persons are not endangered by them.
The regulations in the respective documentation for other heating components apply for transport and storage of these products.
EKSV21P/EKSV26P/EKSH26P
Solar panels on-roof installation
008.1618444_00 – 12/2012
DAIKIN hot water storage tank such as the EKHWP* or the EKHWE*/EKHWS*, and the additional components
can be ordered as options and are supplied separately.
CAUTION!
The DAIKIN flat solar panels are impervious to slight mechanical loading. However, impact, shock and walking
on them should be avoided.
• The DAIKIN flat solar panels should be transported and stored carefully in their original packing only and
this packing should not be removed until shortly before installation.
• The DAIKIN flat solar panels should be stored and transported flat on even and dry supports.
– Transport with forklift trucks or cranes is only allowed if on pallets.
– Up to 10 flat solar panels can be stacked and transported on top of each other.
consists of: High-performance flat solar panels, regulating and pump
consists of: High-performance flat solar panels, regulating and pump unit
3 x Installation
Installation instructions
15