Table Of Contents; Introduction - Toro 22203TE Operator's Manual

66cm heavy-duty rear bagger lawn mower

Hide thumbs

Table Of Contents

Table of Contents

This product complies with all relevant European

directives. For details, see the separate product specific

Declaration of Conformity (DOC) sheet.

For models with stated engine horsepower, the gross

horsepower of the engine was laboratory rated by the

engine manufacturer in accordance with SAE J1940.

As configured to meet safety, emission, and operating

requirements, the actual engine horsepower on this class

of lawn mower will be significantly lower.

Do not tamper with the engine controls or alter the

governor speed; doing so may create an unsafe condition

resulting in personal injury.

Introduction

This rotary-blade, walk-behind lawn mower is

intended to be used by residential homeowners

or professional, hired operators. It is designed

primarily for cutting grass on well-maintained lawns

on residential or commercial properties. It is not

designed for cutting brush or for agricultural uses.

Read this information carefully to learn how to operate

and maintain your product properly and to avoid injury

and product damage. You are responsible for operating

the product properly and safely.

You may contact Toro directly at www.Toro.com for

product and accessory information, help finding a dealer,

or to register your product.

Whenever you need service, genuine Toro parts,

or additional information, contact an Authorized

Service Dealer or Toro Customer Service and have

the model and serial numbers of your product ready.

Figure 1 identifies the location of the model and serial

numbers on the product. Write the numbers in the

space provided.

1. Model and serial number location

8111 Lyndale Avenue South

Bloomington, MN 55420

G018480

Figure 1

Model No.

Serial No.

This manual identifies potential hazards and has safety

messages identified by the safety alert symbol (Figure 2),

which signals a hazard that may cause serious injury

or death if you do not follow the recommended

precautions.

1. Safety alert symbol

This manual uses 2 words to highlight information.

Important calls attention to special mechanical

information and Note emphasizes general information

worthy of special attention.

Contents

Introduction................................................................. 2

Safety ........................................................................... 3

General Safety ...................................................... 3

Sound Pressure..................................................... 5

Sound Power ........................................................ 5

Vibration, Hand/arm ........................................... 5

Safety and Instructional Decals ............................. 5

Setup ........................................................................... 7

1 Installing the Handle.......................................... 7

2 Filling the Engine Crankcase with

Oil.................................................................... 7

Product Overview ........................................................ 8

Controls ............................................................... 8

Operation..................................................................... 9

Checking the Engine Oil Level.............................. 9

Filling the Fuel Tank............................................. 9

Starting the Engine............................................. 11

Stopping the Engine ........................................... 11

Operating the Blade............................................ 11

Operating the Traction Drive.............................. 12

Checking the Blade-Brake Clutch........................ 12

Adjusting the Cutting Height .............................. 13

Using the Grass Bag ........................................... 14

Operating Tips ................................................... 14

Maintenance............................................................... 16

Recommended Maintenance Schedule(s) ................ 16

Premaintenance Procedures.................................... 17

Preparing for Maintenance ................................. 17

Figure 2

Printed in the USA

Table of Contents

Table Of Contents; Introduction - Toro 22203TE Operator's Manual

Introduction

Related Manuals for Toro 22203TE

Related Content for Toro 22203TE

Table of Contents