Using the Hydraulic System
Test Ports
Use the hydraulic system test ports to test the pressure in
the hydraulic circuits. Contact your local Toro distributor for
assistance.
Use the test ports on the front hydraulic tubes
assist in troubleshooting the traction circuit.
1. Traction-circuit-test port
Use the test ports on the mow manifold block
assist in troubleshooting the mow circuit.
(Figure
Figure 71
(Figure
71) to
1
1. Mow circuit test ports (2)
Use the test port on the lift manifold block
assist in troubleshooting the lift circuit.
72) to
1. Lift circuit test port
48
g021221
Figure 72
(Figure
Figure 73
1
73) to