22
WS 2000 Quick Installation Guide
Each Ethernet port has two LEDs. The LED on the left side of the port indicates whether the port is
transmitting at 10 Mbit/sec. or 100 Mbit/sec. The light is off when transmitting at 10 Mbit/sec. The
light is on when transmitting at 100 Mbit/sec.
The LED on the right side indicates an Ethernet link or activity on that port. This light is on solidly when
a link to a device is made. The light flashes when traffic is being transferred over the line.
10/100
Link/Activity
PoE
The four ports that have PoE capabilities also have a PoE LED. A green light indicates that 48 volts
are being delivered to the power device connected to that port. A red light indicates that the power
device on the port is faulty. Once set to red, the light remains red until a non-faulty device is installed.
If a non-power device is connected to the port, the PoE light remains off.