Wireless Summary Area - Symbol WS 2000 Quick Installation Manual

To start the WLAN configuration process, select the Network Configuration --> Wireless item
from the left menu. The following Wireless summary screen appears.

Wireless Summary Area

The top portion of the window displays a summary of the WLANs that are currently defined. This is
the screen in which the administrator can enable or disable a WLAN. At first, four WLANs are listed
WLAN1, WLAN2, WLAN3, and WLAN4; however, only WLAN1 is enabled.
1. Verify that WLAN1 is enabled (checked) and associated with Subnet1.
2. Verify that Access Port 1 is shown in the Access Ports Adopted field to the right. If it is
not, verify the connection between the switch and the Access Port.
The current settings for the associated Subnet and adopted Access Ports are displayed on this screen;
however, the screen associated with each WLAN (under Network Configuration --> Wireless) is
where the settings and rules for adopting Access Ports can be modified.
Configuring the WS 2000 Wireless Switch
37