Specifications - Toro 08886 Operator's Manual

Specifications

Configuration: Tricycle vehicle with welded steel
frame construction. Rear engine placement. All
wheels powered.
Engine: Briggs & Stratton, V-twin cylinder, 4-cycle,
OHV, air-cooled, gas engine. 13.4 kW @ 3600 rpm,
570 cc displacement, 1.7 l. oil capacity. Electronic
ignition. Full pressure lubrication, oil filter.
Gauges: Hour meter.
Controls: Hand-operated throttle, choke and lift
lever. Foot pedal controls traction forward/reverse
speed.
Steering: Front wheel steering with adjustable tilt
steering wheel.
Gas Tank: 20.8 l capacity.
Battery: 12-volt, lead acid, 32 amp hour.
Drive: Hydraulic. Coupling driven variable displace-
ment piston pump with integral auxiliary charge
pump to hydraulic motors which directly drive
wheels.
Hydraulic Oil Filter: 25-micron, spin-on type.
Hydraulic Oil Reservoir: 11.4 l capacity.
Valve: Single section for raising and lowering of
implement.
Cylinder: Double acting.
Tires: 22 x 11.00 - 8 two-ply pneumatic tubeless.
De-mountable and interchangeable. Recommended
tire pressure is 28 kPa.
Speeds (at 3200 RPM): Variable between 0 and 17.7
kmh forward and 0 and 6.4 kmh reverse.
Seat Adjustment: 10 cm—fore and aft. Additional
4 cm forward adjustment available by using front
mounting holes. Additional adjustment for small
operator attained by removing the seat slides and
base and mounting the seat directly to support.
Dimensions:
Width w/o implements:
Width w/rake (Model 08812):
Height:
Length w/o implements:
Wheelbase
Net Weight: (Wet)
Optional Equipment:
Drag Mat, Model
Rake Mounting Kit, Model No.
Tooth Rake, Model No.
Weeder/Cultivator, Model No.
Finish Grader, Model No.
Spiker, Model No.
Hitch,
Front Blade
147 cm
190.5 cm
114.9 cm
163.8 cm
108.5 cm
302 kg
08845
08814
08812
08815
08867
08856
Part No. 20-3900
Model No.08821
7