Table of Contents
Advertisement
Trouble
When the On/Off
button is pushed,
nothing is displayed.
The value of body fat
percentage is displayed
abnormally high (or low).
An error (E1 to E6)
is displayed and
the measurement
is impossible.
The measured values
differ extremely for
each measurement.
Other conditions.
Troubleshooting
What to inspect
Are the batteries
worn out?
Is the direction
of battery
polarities correct?
Is the measurement
posture correct?
Please refer to "Explanation of Error Displays".
(Refer to Page 15.
Please refer to "For a Correct Measurement"
(Refer to Pages 21 to 22.)
Push the On/Off button again and restart from the
beginning again.
(Refer to Pages 8 to 13.)
If you cannot get a correct measurement after taking the above
mentioned measures, please contact the nearest OMRON dealer.
16
How to repair
Replace both batteries
with new ones.
(Refer to Page 7.)
Insert the batteries
correctly.
(Refer to Page 7.)
Measure again in
correct posture.
(Refer to Pages 12 to 13.
)
)
Hide quick links:
Advertisement
Table of Contents
