BOMBARDIER Outlander 400 Operator's Manual page 120

Beam Aiming Adjustment
Adjust beam aiming as follows:
Turn adjustment screws to adjust
beam height and side orientation to
your convenience. Adjust both head-
lamps evenly.
vmo2006-005-040_b
1. Headlamp cover
2. Adjustment screws
Taillight
Unscrew lens screws to expose bulbs.
2 1
V07G04Y
1. Lens
2. Screws
Push the bulb in and hold while turning
counterclockwise to release.
Install the new bulb by first pushing in
while turning clockwise.
Speedometer
The speedometer is lighted with
LEDs. If one LED burnt, replace the
speedometer. The LEDs are not avail-
able separately.
_____________________
118