Advertisement
Trickle charge (Maintenance charge)
If you leave the battery cartridge,
in
the charger
to
prevent spontaneous
discharging after
full charge, the charger will switch into its "trickle charge (maintenance charge)" mode
and keep the battery cartridge fresh and fully charged.
Tips for maintaining maximum battery life
1. Charge the battery cartridge before completely discharged. Always stop tool operation
2. Never recharge a fully charged battery cartridge. Overcharging shortens the battery
3. Charge the battery cartridge with room temperature a t 10°C - 40°C (50°F
-
104"F)..Let
4. Charge the Nickel Metal Hydride battery cartridge when you do not use
it
for more than
and charge the battery cartridge when you notice less tool power.
service life.
a hot battery cartridge cool down before charging it.
six months.
Switch action
CAUTION:
Before inserting the battery cartridge into the tool, always check to see that the switch
trigger actuates properly and returns to the
To start the tool, simply pull the trigger.
Tool speed is increased by increasing pres-
sure on the trigger. Release the trigger to
stop.
"OFF" position when released.
9
Advertisement
