Advertisement
USEOZS-l
Specific Safety Rules
1. Hold tool by insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring. Contact with a "live" wire will
also make exposed metal parts of the tool "live" and shock
the
operator.
2.
Be aware that this tool is always
in
an operating condition, because
it
does
not have t o be plugged into an electrical outlet.
3.
Wear ear protectors.
4.
Check the socket carefully for wear, cracks or damage before installation.
5. Hold the tool firmly.
6.
Always be sure you have a firm footing.
7.
Be sure no one is below when using the tool in high locations.
8.
The proper fastening torque may differ depending upon the kind or size of
the bolt. Check the torque with a torque wrench.
SAVE THESE INSTRUCTIONS.
SYMBOLS
The followings show the
symbols
used for tool.
v
....................................
volts
-
....................................
direct current
n ,
....................................
no load speed
.../
min ...................................
revolutions
or
reciprocation per minute
c-
....................................
number of blow
4
Advertisement
