Makita BTW450 Instruction Manual
Cordless impact wrench
Hide thumbs
Also See for BTW450:
- User manual ,
- Instruction manual (45 pages) ,
- Parts breakdown (2 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita BTW450
Summary of Contents for Makita BTW450
- Page 1 INSTRUCTION MANUAL Cordless Impact Wrench BTW450 008145 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Specifications
ENG102-3 EC Declaration of Conformity Noise Makita Corporation responsible The typical A-weighted noise level determined according manufacturer declare that the following Makita to EN60745: machine(s): Sound pressure level (L ) : 94 dB(A) Designation of Machine: Sound power level (L... -
Page 3: General Power Tool Safety Warnings
Do not abuse the cord. Never use the cord for representative in Europe who is: carrying, pulling or unplugging the power tool. Makita International Europe Ltd, Keep cord away from heat, oil, sharp edges or Michigan, Drive, Tongwell, moving parts. Damaged or entangled cords Milton Keynes, MK15 8JD, England increase the risk of electric shock. - Page 4 18. Do not use the power tool if the switch does 29. Follow instruction lubricating not turn it on and off. Any power tool that cannot changing accessories. be controlled with the switch is dangerous and 30. Keep handles dry, clean and free from oil and must be repaired.
-
Page 5: Functional Description
FUNCTIONAL DESCRIPTION Do not short the battery cartridge: Do not touch the terminals with any conductive material. CAUTION: Avoid storing battery cartridge in a Always be sure that the tool is switched off and the • container with other metal objects such as battery cartridge is removed before adjusting or nails, coins, etc. - Page 6 tool stops may damage the tool. Installing or removing socket The switch is reversible, providing either clockwise or 1. Socket counterclockwise rotation. To start the tool, simply pull 2. Anvil the lower part (A) of the switch trigger for clockwise or the upper part (B) for counterclockwise.
-
Page 7: Operation
The hook is convenient for temporarily hanging the tool. Standrad bolt This can be installed on either side of the tool. To install the hook, insert it into a groove in the tool (kgf cm) housing on either side and then secure it with a screw. To remove, loosen the screw and then take it out. -
Page 8: Maintenance
Operating the tool at low speed will cause a If you need any assistance for more details regarding reduction in the fastening torque. these accessories, ask your local Makita Service Center. Sockets • MAINTENANCE Extension bar •... - Page 12 Makita Corporation Anjo, Aichi, Japan 884689B226...