Download Print this page

Omron IntelliSense HEM-705CP Instruction Manual: Quick Reference Guide

Automatic blood pressure monitor and print-out with intellisense.
Hide thumbs

Advertisement

QUICK REFERENCE GUIDE

1. Avoid eating, smoking, and exercising for at least 30 minutes before
taking a measurement.
2. Remove tight-fitting clothing from your upper arm.
3. Sit in a chair with your feet flat on the floor and place your arm
on a table so that the cuff is at the same level as your heart.
4. Put your arm through the cuff loop making sure that the bottom edge
of the cuff is approximately one-half inch above the elbow and that
the Green Marker on the cuff is above brachial artery.
5. Pull the end of the cuff so that the entire cuff is evenly tightened around
your arm and press the hook material firmly against the pile side of the
cuff.
6. Press the ON/OFF button.
7. After the Heart Symbol (
button, and remain still until the measurement is complete.
8. When measurement is complete, the monitor displays your blood
pressure and pulse rate, and automatically deflates the cuff.
9. Wait 2-3 minutes before taking another blood pressure measurement.
1/2 inch
Green Marker
) appears on the digital panel, press the Start
TITLE

Advertisement

   Also See for Omron IntelliSense HEM-705CP

   Related Manuals for Omron IntelliSense HEM-705CP

Comments to this Manuals

Symbols: 0
Latest comments: