Pair with a Communication Base or Access Point
The 8670 ring scanner can pair with Honeywell communication
bases such as such as the CCB01-010BT, and with Access
Points such as the AP-010BT and AP-100BT.
1. Scan the Bluetooth HID Keyboard Disconnect bar code.
2. Use the ring scanner to scan the Mac address bar code that
is either supplied with the device or attached to the device.
The ring scanner begins ticking and the LED on top of the
Bluetooth module blinks to indicate pairing mode.
Your base or Access Point should now be paired with the ring
scanner and be able to accept incoming data from the 8670.
Bluetooth HID Keyboard Disconnect