2. DST
Go to "Main Menu" → "System" → "General" → "
Enter into the interface to set DST, Time Offset, Start Time and End Time.
3. NTP
Go to "Main Menu" → "System" → "General" → "NTP".
NTP service: Enable/Disable NTP function.
Server Address: Select NTP server (time.windows.com, time.nist.gov, pool.ntp.org).
Time Zone: Corresponding time zones for various nations or regions.
Update Time: Enable NTP function and save parameters and click Update Time to
calibrate the system time.
Note: When NTP function is set to "Enable", system will calibrate the system time at
every 00:07:50 and every start-up.
".
DST
42