Samsung SDH-B74041 User Manual page 27

9. Capture Schedule
Go to "Main Menu"->"Parameter"->Capture Schedule.
10. Network
Go to "Main Menu" → "Parameter" → "Network" → "Network" to enter the interface.
Select the network connection option (PPPOE, DHCP, Static) to set the port. User can view and
do the recording, playback or backup of the video remotely.
Take DHCP as an example. In this mode, the router automatically assigns IP address for the DVR.
After restarting the DVR or DHCP server, the IP address obtained by the DVR may be different. As
a result, you need to check the IP address and port numbers before remote access to the DVR
every time. The operation procedure is as follows:
1. Select DHCP, click Save and restart the DVR. Input Client Port and HTTP Port (the two ports
must be different).
2. Remotely visit the DVR by using IP address plus HTTP port through web browsers.
http://Public network IP: HTTP port number (such as 00080)
http:// Intranet IP: HTTP port number (such as 00080) (Only available in the same LAN)

Normal: Conventional capture setting

Motion: Motion detect capture setting
For PPPoE, Static and DHCP, after setting the IP
address for the DVR, the extranet port shall be
mapped in the router before visiting DVR through
public network.
Note: Save the setting to apply the changes
made. If there are multiple DVRs in a LAN, make
sure their MAC addresses are different.
27