Samsung SDH-B74041 User Manual page 28

11. E-mail
Go to "Main Menu" → "Parameter" → "Network" → "Email" to enter into the menu interface.
Receive or Send DVR alarm Email and set parameters like Email address, SSL, Email Enable,
and Interval.

SSL: This is an industry standard transport protocol that establishes an encrypted link
between the web server and browser. This link ensures that all data that passes between the
web server and browser remains private and integral. If the setting is incorrect, check you
mail server‟s SMTP port

SMTP Port: The mail sending port used by SMTP (Simple Mail Transfer Protocol) server is
generally Port 25, or Port 465.

SMTP Server: Enter the address of the server for the mailbox in use.
 Sender address: Sender‟s mail address, which must correspond to the server used. For
example, mailbox "aaa@gmail.com" should correspond to server "smtp.gmail.com".
 Recipient address: Recipient‟s mail address, used to receive alarm image and message
from DVR side. If system alarms continually and sends email images frequently, save the
images to another location or remove them, so as to avoid excessive space occupation and
thereby affect your normal use of mailbox.

Time interval: A mail will be sent every three minutes by default. If the time interval for mail
notification is set too short, email server may deem mails as junk mails, so they cannot be
transferred normally.
28