Samsung SDH-B74041 User Manual page 23

Adjust the brightness, hue, contrast and saturation of the image in selected channel in "Live"
interface.
Note: To modify the parameter value in sub-menu and make it effective, click "Save" after
modification and a dialog box with message "Save parameters successful！" will pop up.
Click "OK" in the interface, then "Exit" to exit the menu. If you want to cancel the modification,
click "Cancel" to exit.
Use Virtual Keyboard
Virtual keyboard window will be displayed for input.. Click on the desired characters to apply
them. Press <Shift> to switch to input of upper-case letters.
Press <Shift> again to switch to input of special characters. The virtual keyboard is used in
the same way as with physical keyboard.
For input of password, use letters and special characters other than <\> and <">.
2．Output
Go to "Main Menu"→ "Parameter"→ "Display"→ "Output" to enter into the interface.

Video Output: Live Output

Sequence Mode: layout1, layout4, layout6

SEQ Time: Sequence time is set 5
seconds by default. User may set it as
required up to 300 seconds

VGA/HDMI Resolution: For VGA output or
HDMI output, the optional resolution
includes 1024×768, 1280×1024,
1440×900, 1280×720, 1920×1080

Transparency: Adjust menu transparency
in the range of 0-128.

Support Overscan: Support HDMI
23
overscan