Safety And Instructional Decals - Toro Power Max HD 1028 OHXE 38826 Operator's Manual

Safety and Instructional Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged decals.
1. Left turn control
2. Traction drive—squeeze the lever to
engage; release the lever to disengage.
3. Warning—read the Operator's Manual.
Order part no. 112-6633
1. Fast
2. Forward speeds
4. Cutting/dismemberment hazard,
impeller—do not place your hand in the
chute; stop the engine before leaving
the operator's position, use the tool to
clear the chute.
5. Cutting/dismemberment hazard,
impeller—keep away from moving
parts; remove the ignition key and read
the instructions before servicing or
performing maintenance.
6. Thrown object hazard—keep
bystanders a safe distance from the
snowthrower.
106-4525
3. Slow
4. Reverse speeds
127–5991
1. Cutting dismemberment, impeller and cutting
dismemberment, auger hazards—keep bystanders a safe
distance from the snowthrower.
Reorder part no. 112-6629
1. Cutting/dismemberment hazard, impeller—do not place
your hand in the chute; stop the engine before leaving the
operator's position, use the tool to clear the chute.
3
7. Auger/impeller drive—squeeze the
lever to engage; release the lever to
disengage.
8. Right turn control
9. Hand warmer controls
107-3040
112-6625