Drive System Maintenance; Changing The Transmission Oil Filter; Changing The Hydraulic Return Filter - Toro CT2120 30655 Operator's Manual

WARNING
Charging the battery produces gasses that can
explode.
Never smoke near the battery and keep sparks and
flames away from it.
Check the battery condition. Keep the terminals and
the entire battery case clean because a dirty battery will
discharge slowly. To clean the battery, wash the entire
case with a solution of baking soda and water. Rinse it
with clear water.
Drive System
Maintenance
Changing the Transmission
Oil Filter
Service Interval: After the first 50 hours
Every 500 hours
Right hand side of machine
1. Transmission oil filter
1. Unscrew and remove the bottom of the transmission
oil filter housing.
2. Withdraw the filter element and discard.
3. Refit a new filter element (Part no. 924709).
4. Install the housing.
Changing the Hydraulic Return
Filter
Service Interval: After the first 50 hours
Every 500 hours
1. Remove the return filter.
2. Wipe oil onto the new return filter gasket.
3. Install the new return filter to the machine.
39
g014438
1 2
Figure 52
2. Engine fuel filter