Ignition Key; Hour Meter; Transmission Neutral Indicator Light; Fuel Gauge - Toro CT2120 30655 Operator's Manual

Ignition Key

0 = Engine off.
I = Engine run/Auxiliary on.
II = Engine pre-heat.
III = Engine start.
WARNING
Always remove the ignition key when the mower is
not in use.
Important: Always install the protective cap when
the ignition key is removed to prevent ingress of
dirt and moisture and damaging the mechanism.
1
Figure 17
1. Ignition switch
Engine Pre-Heat Indicator Light
Turn the ignition key to position II. The engine preheat
indicator light will illuminate and heat the glow plugs
(Figure 18).
Important: Attempting to start a cold engine
before the pre-heat is used can cause unnecessary
wear to the battery.
Figure 18
1. Engine pre-heat indicator light

Fuel Gauge

The fuel gauge shows the amount of fuel in the tank
(Figure 19).
I
II
III
G014556
1
G014557

Hour Meter

The hour meter shows the total hours that the machine
has been operated (Figure 20).
1
1. Hour meter

Transmission Neutral Indicator Light

This light illuminates when the travel control pedal is
in the neutral position and the ignition key is turned to
position I (Figure 21).
Note: The parking brake must be engaged for the
transmission neutral indicator light to illuminate.
1. Transmission neutral indicator light
17
FUEL
E
F
G014558
Figure 19
000.0
Figure 20
1
G0014560
Figure 21
G014559