Features; Initial Setup - La Crosse Technology S84193 Instruction Manual

Features

Outdoor temperature (ºF / ºC)
Signal strength icon for sensor transmission
Outdoor temperature trend indicator
Outdoor temperature alerts (low/high)
Outdoor humidity (%RH) with trend indicator
Animated forecast icons
Forecast tendency indicator
12/24 hour atomic time and date (manual setting)
Perpetual calendar (day / month / date)
Indoor temperature (ºF / ºC)
Indoor temperature trend indicator
Indoor temperature alerts (low/high)
Indoor humidity (%RH) with trend indicator
Backlight control (high / low / off)
Outdoor heat index and dew point
Minimum and maximum in / out temperature
Station and sensor low battery icon
Snooze / alarm icon
• Sits on desktop or tabletop

Initial Setup

1. Insert A/C adapter into the wall outlet then into the weather station or insert 3-AAA Alkaline batteries (not
included) into the weather station (see Power the Weather Station).
2. Insert 2-AA Alkaline batteries into the transmitter, observing the correct polarity (see Install Batteries in the
Outdoor Transmitter).
3. Keep the transmitter 5-10 feet from the weather station for 15 minutes to establish a good connection.
4. Within 3 minutes the station will beep and the outdoor temperature should show on the weather station. If
the outdoor temperature does not show after 3 minutes remove power from the transmitter and the weather
station for 60 seconds and start again from step 1.
5. For optimum 433 MHz transmission, the outdoor transmitter should be placed a distance of no more than
200 feet (60 meters, open air) from the weather station.
IMPORTANT:
Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries
3