Canon MG6400 series Online Manual page 38

3. Select the layout
Select Normal-size, Fit-to-Page, Scaled, or Page Layout from the Page Layout
list.
4. Specify the side to be stapled
The best Stapling Side is selected automatically from the Orientation and Page
Layout settings. To change the setting, select another stapling side from the list.
5. Set the margin width
If necessary, click Specify Margin... and set the margin width, and then click OK.
6. Complete the setup
Click OK on the Page Setup tab.
When you execute print, the document is first printed on one side of a sheet of paper.
After one side is printed, reload the paper correctly according to the message.
Then click Start Printing to print the opposite side.
Important
Duplex Printing appears grayed out and is unavailable when:
• A media type other than Plain Paper is selected from the Media Type list.
• Tiling/Poster and Borderless are selected from the Page Layout list.
When Booklet is selected from the Page Layout list, Duplex Printing and Stapling
Side appear grayed out and are unavailable.
38