Settings For Web Service - Canon MG6400 series Online Manual

Settings for Web Service

This section describes the machine's settings for web service.
Registering the Account on Photo Sharing Site
Resetting the Web Service Settings
Before using the web service, see the terms of service.
Notice for Web Service Printing
Registering the Account on Photo Sharing Site
Register the account on the photo sharing site to the machine following the procedure below.
Important
• LAN connection with the machine and internet connection are required to use this function.
• Before you register the account to the machine, you have to get the account on the photo sharing
site. For getting the account, refer to the photo sharing site.
• You can register the login name or e-mail address up to 256 characters and register the password up
to 80 characters. When you get the account on the photo sharing site, set the login name or e-mail
address within 256 characters and set the password within 80 characters.
Set the login name, e-mail address, and password in letters and figures can be entered on the LCD
of the machine.
1. Make sure that the machine is turned on.
2. Select Setup on the HOME screen.
LCD and Operation Panel
3. Select Web service setup, then press the OK button.
4. Use the button to select Online Album connection setup, then press the OK button.
5. Use the button to select Register account, then press the OK button.
Note
• When you delete the account, select Delete account, then press the OK button. After selecting
the photo sharing site to delete the account and pressing the OK button, the confirmation screen
to delete the account is displayed. To delete the account, select Yes and press the OK button.
6. Use the button to select the photo sharing site to register the account, then press the
OK button.
The message for account information is displayed.
210