Canon MG6400 series Online Manual page 138

Select File...
Opens the dialog box to open a file.
Click this button to select a bitmap file to be used as a stamp.
Size
Adjusts the size of the bitmap file to be used as a stamp.
Moving the slider to the right increases the size, moving the slider to the left
decreases the size.
Transparent white area
Specifies whether to make white-filled areas of the bitmap transparent.
Check this check box to make white-filled areas of the bitmap transparent.
Uncheck this check box if you do not want to make white-filled areas of the
bitmap transparent.
Note
Click Defaults to set Stamp Type to text, Stamp Text to blank, TrueType
Font to Arial, Style to Regular, Size to 36 points, Outline unchecked, and
Color to gray with the RGB values (192, 192, 192).
Placement Tab
The Placement tab allows you to set the position where the stamp is to be
printed.
Preview Window
Shows the status of the stamp configured in each tab.
Position
Specifies the stamp position on the page.
Selecting Custom from the list allows you to enter values for the X-Position
and Y-Position coordinates directly.
Orientation
Specifies the angle of rotation for the stamp. The angle can be set by
entering the number of degrees.
Negative values rotate the stamp clockwise.
Note
Orientation is enabled only when Text or Date/Time/User Name is
selected for Stamp Type on the Stamp tab.
Note
Click Defaults to set the stamp position to Center and the orientation to 0.
138