Canon MG6400 series Online Manual page 108

Note
Disable ICM required from the application software cannot be used when the
XPS printer driver is used.
• Do not start up the Canon IJ Network Tool while printing.
• Do not print when the Canon IJ Network Tool is running.
• The card slot of the machine may become inaccessible. In such cases, restart the
machine or turn it off and reconnect the USB cable.
Points to Note About Applications with Restrictions
• There are following restrictions in Microsoft Word (Microsoft Corporation).
• When Microsoft Word has the same printing functions as the printer driver, use Word
to specify them.
• When Fit-to-Page, Scaled, or Page Layout is used for Page Layout on the Page
Setup tab of the printer driver, the document may not print normally in certain
versions of Word.
• When Page Size in Word is set to "XXX Enlarge/Reduce", the document may not print
normally in certain versions of Word.
If this happens, follow the procedure below.
1. Open Word's Print dialog box.
2. Open the printer driver setup
to the same paper size that you specified in Word.
3. Set the Page Layout that you want, and then click OK to close the window.
4. Without starting printing, close the Print dialog box.
5. Open Word's Print dialog box again.
6. Open the printer driver setup window and click OK.
7. Start printing.
• If bitmap printing is enabled in Adobe Illustrator (Adobe Systems Incorporated), printing
may take time or some data may not be printed. Print after unchecking the Bitmap
Printing check box in the Print dialog box.
window, and on the Page Setup tab, set Page Size
108