Canon MG6400 series Online Manual page 206

Note
• If you specify the number of copies for each photo, use the
you want to print and use the + or - button to specify the number of copies when the desired
photo is displayed.
• You can also display the screen to specify the number of copies by pressing the OK button
when the desired photo is displayed. When the screen to specify the number of copies is
displayed, specify the number of copies by using the + or - buttons. Press the OK button to
display the photo selection screen.
2. Selection photo
Select the photo you want to print by using the
3. Print settings
By pressing the right Function button, the print settings confirmation screen is displayed.
Use the button to change the setting item, use the
the OK button to confirm the selection.
A. Page size
The page size is set to 4"x6"(10x15cm).
B. Type (Media type)
Select the media type of the loaded paper.
C. Print qlty (Print quality)
Select print quality according to the photo.
D. Border (Bordered/Borderless print)
Select bordered or borderless print.
E. Photo fix
When Auto photo fix is selected, the scene or person's face of a shot photo is recognized and
the most suitable correction for each photo is made automatically. It makes a darkened face by
backlight brighter to print. It also analyzes a scene such as scenery, night scene, person, etc.
and corrects each scene with the most suitable color, brightness, or contrasts automatically to
print.
Depending on the type of the photo, the photo may not be corrected.
Note
• As a default, photos on the photo sharing site are printed with auto correction applied.
• If No correction is selected, photos are printed without correction.
F. Red-EyeCorrection
button.
button to change the setting, then use
206
button to display the photo