Switch 3300 Fx - Front View Detail; 100Base-Fx Ports; 10Base-T; 100Base-Tx Ports - 3Com 3300 User Manual

Switch 3300 FX —
Front View Detail

100BASE-FX Ports

10BASE-T/

100BASE-TX Ports

LEDs

Figure 1 Switch 3300 FX — front view
The Switch has eight 100BASE-FX ports capable of operating in half
duplex or full duplex mode. A 2km (6562ft) fiber run is the maximum
length allowed for a segment.
The Switch has two auto-negotiating 10BASE-T/100BASE-TX ports
configured as MDIX (cross-over). These ports can be set to 10BASE-T half
duplex, 10BASE-T full duplex, 100BASE-TX half duplex, 100BASE-TX full
duplex, or they can automatically detect the speed and duplex mode of a
link and provide the appropriate connection. The maximum segment
length is 100m (328ft) over Category 5 twisted pair cable.
Table 3 lists the LEDs visible on the front of the Switch, and their states
according to color. For information on using the LEDs for problem solving,
see "Solving Problems Indicated by LEDs"
Switch 3300 FX — Front View Detail
on page 31.
13