Replacing The Warning Decal; Reading The Manuals And Review The Training Materials; Product Overview; Controls - Toro Groundsmaster 4100-D 30411 Operator's Manual

Lubrication , page 34. Failure to properly grease the
machine will result in premature failure of critical parts.
3

Replacing the Warning Decal

Parts needed for this procedure:
1 Warning Decal
Procedure
On machines requiring CE compliance, replace the
warning decal, part no. 112–9118 with the warning decal
part no. 106–6752.
4
Reading the Manuals and
Review the Training Materials
Parts needed for this procedure:
1 Operator's Manual
1 Engine Operator's Manual
1 Parts Catalog
1 Operator Training Materials
1 Pre-delivery Inspection Sheet
1 CE certificate
Procedure
1. Read the manuals.
2. View the Operator Training materials

Product Overview

1. Traction pedal
2. Brake pedals
3. Pedal locking latch
4. Tilt steering lever
5. Parking brake latch

Controls

Note: Determine the left and right sides of the machine
from the normal operating position.
This machine produces sound levels in excess
of 85 dBA at the operators ear and can cause
hearing loss through extended periods of
exposure.
Wear hearing protection when operating this
machine.
Traction Pedal
The traction pedal (Figure 2) controls forward and
reverse operation. Press the top of the pedal to move
forward and the bottom to move backward. Ground
speed depends on how far you press the pedal. For no
15

Figure 2

6. Charge indicator
7. Engine oil pressure
warning light
8. Engine coolant
temperature warning
light
9. Glow plug indicator light
10. Temperature gauge