Connecting The Water Supply Hose - Samsung WF8*F5E series User Manual

STEP 3 - Adjusting the levelling feet
When installing your washing machine, ensure that the power plug, the water supply, and the drain
are easily accessible.
1. Slide the washing machine into position.
2. Loosen all the lock nuts with the wrench.
3. Level your washing machine by turning the levelling feet in and
out as necessary by hand.
4. When your washing machine is level, tighten the lock nuts using
the wrench.
CAUTION: Do not move your washing machine unless
you tighten the lock nuts. This may result in damage to the
leveling feet.
STEP 4 - Connecting the water and the drain

Connecting the water supply hose

WARNING: Do not connect multiple water supply hoses. This may result in a water leak and electric
shock due to the water leak. If the hose is too short, replace the hose with a longer, high pressure
hose.
1. Connect the L-shaped arm fitting for the cold water supply hose
to the cold water supply intake at the back of the machine. Then
tighten it by turning
(*): Optional
2. Remove the adaptor (B)
hose (C).
F400E_DC68-03633B-00_EN.indd 15
part (A)
clockwise by hand.
from the other end of the
English - 15
A
water supply
B
C
2015-08-13 11:52:39