Table of Contents
Advertisement
Available languages
Available languages
- IF YOU HAVE A PROBLEM
PROBLEM
Motor does not start.
Suction force is gradually
decreasing.
Cord does not rewind fully.
Vacuum cleaner does not
pick up dirt.
Low or decreasing suction
This Vacuum cleaner is approved the following.
EMC Directive : 2004/108/EEC
Low Voltage Directive : 2006/95/EC
CAUSE
No power supply.
Thermal cut-out.
Nozzle, suction hose or tube
is blocked.
Check that the cord is not
twisted or wound unevenly.
Crack or hole in hose.
Filter is full of dust.
10
REMEDY
Check cable, plug and socket.
Leave to cool.
Check for blockage and
remove it.
Pull the cord out 2-3m and
push the cord rewind button.
Check hose and replace if
required.
Please check filter and, if
necessary, clean as illustrat-
ed in the instructions.
Advertisement
Table of Contents
