Microplex SOLID T11 DT Operator's Manual page 91

________________________________________________________________________________________________
Peripheral device selection:
LINE
ENTER
»
ENTER
»
ENTER
»
ENTER
»
ENTER
LINE
Hint: After having finished the settings described above, the printer has to be
turned off and on. After printer power off and on the new settings will be valid.
_______________________________________________________________________________________________
MICROPLEX
Panel display
[ON LINE ]
[OFF LINE ]
[Menu Level 1 ]
$ $ $
[Engine ]
[Printspeed ]
$ $ $
[Service Menu ]
[Dot-Test ]
$ $ $
[Periph. Device ]
[TearOff Edge ]
$ $ $
[Cutter ]
[Saved! ]
Operator's Manual SOLID T11 DT / TT
Panel Functions
Notes
Turn the printer OFF LINE with this
key.
The ENTER key gives the user access
to the menu structure.
Press the NEXT or PREVIOUS key
until [Engine ] is displayed.
Press the NEXT or PREVIOUS key
until [Service Menu ] is displayed.
Press the NEXT or PREVIOUS key
until [Periph. Device ] is displayed.
Press the NEXT or PREVIOUS key
until the desired peripheral device is
displayed.
The cutter (option) is selected.
Turn the printer ON LINE again:
Press the LINE key.
91
Edition 1.1