Samsung VP-DX10 User Manual page 42

before recording
When using a new disc: formatting a new disc
Formatting may be required if a new disc is inserted.
Recognition of the disc will start.
For a DVD-R/+R DL disc: Formatting will automatically begin.
For a DVD-RW disc: The Format menu is offered. Select the recording format, Video mode
or VR mode.
Format the disc in the Disc Management menu when you want to format again. page 86
Video (Video Mode) : If the disc has been
Finalised, you will be able to play the disc
on most DVD players/recorders/drives.
Differences
between Video
VR (VR Mode) : You can edit the disc on
and VR mode
a DVD camcorder, but playback is only
possible on a DVD recorder that supports
VR mode.
- Refer to page 8 for Finalised disc compatibility.
For a DVD+RW disc: The Format menu is offered. Formatting makes the recorded
disc new and reusable by deleting all the data recorded on the disc.
Removing a disc
1. Slide the OPEN switch in the direction of the arrow.
• The disc cover will partially open.
2. Gently open the cover the rest of the way by hand.
3. Remove the disc.
• While pushing down the centre portion of the disc spindle, pick up the disc by the
edges to remove.
4. Gently push the disc cover to close it.
• The Finalise/Format functions are not available at the low battery level under (
Use the AC power adaptor when fi nalising/formatting a DVD disc.
• You cannot open the disc cover while loading. Wait until disc loading is
completed.
• Do not operate the power switch or remove a memory card or a disc while
accessing the storage media.Doing so may damage the storage media or the
data on storage media.
• You can not proceed with recording when the disc cover is open. An icon and
message are shown that recording is impossible with the disc cover open.
• It may take longer to open the cover when using DVD+RW rather than other
type of disc. Especially, more than 5 minutes may be required if there are a lot
of movie images recorded on the disc.
36_ English
录制之前
当放入一张新光盘：格式化新光盘
当放入一张新光盘的时候也许需要格式化。
碟片将被重新识别。
对于 DVD-R/+R DL 光盘：格式化将会自动开始。
对于 DVD-RW 光盘：显示格式化菜单。选择录制格式，Video 或 VR 模式。
当您想再次进行格式化的时候，请通过光盘管理器菜单对光盘进行格式化。 第 86 页
Format the disc?
If not, remove the disc.
Video VR
<When a DVD-RW disc is formatted.> <When a DVD-RW disc is formatted.> <When a DVD-RW disc is formatted.>
对于 DVD+RW 光盘：显示格式化菜单。格式化光盘将会删除光盘上所有记录
的数据。
取出光盘
1. 按照箭头指示方向推动 OPEN 开关。

光盘舱盖被打开。
2. 用手柔和地打开舱盖。
3. 取出光盘。
 当按下转盘的中间部分时，从边缘取出光盘。
4. 轻推光盘舱盖，关闭。

).




Video（视频模式） ：若光盘已经终结，
您将可以在多数的 DVD 播放机 / 刻录器
Video 和 VR
上播放该光盘。
模式之间
VR（VR 模式） ：您可以在 DVD 摄像机
的不同
上编辑光盘，但是只有在支持 VR 模式
的 DVD 录像机上才有可能播放该光盘。
- 有关光盘终结的兼容性信息，请参见第 8 页。
电池电量低 ( ) 时不可使用格式化 / 终结功能。
当终结 / 格式化 DVD 光盘时请使用交流电源适配器提供电量。
当 载入光盘的过程中不要打开光盘舱盖。必须等到光盘载入结束才可以打开
光盘舱盖。
当访问存储介质的时候不要操作电源开关以及取出存储卡或光盘。
否则会损坏存储介质或记录在存储介质上的数据信息。
当 光盘舱盖打开时，不可以继续进行录制。在光盘舱盖为开启状态下，不可
能进行录制操作，屏幕上会出现提示图标和信息
使用 DVD+RW 而不是其他类型的光盘时，打开盖子所需的时间可能会稍长一些。
具体说来，如果光盘上录制了大量影音图像，则可能需要 5 分钟以上。
中文 _36