Samsung VP-DX10 User Manual page 65

• A subject can be shot under various types of lighting conditions indoors
(natural, fl uorescent, candlelight, etc.). Because the colour temperature
is different depending on the light source, the subject tint will differ
depending on the white balance settings. Use this function for a more
natural result.
• It is recommended that you specify "Digital Zoom: Off" (page 67)
before setting white balance.
• Do not use a coloured object when setting white balance: The appropriate
tint cannot be set.
• This function will be set to "Auto" in the EASY Q mode.
• Reset the white balance if lighting conditions change.
• During normal outdoor recording, setting to auto may provide better
results.
Exposure
The DVD camcorder usually adjusts the exposure automatically. You can
also manually adjust the exposure depending on the recording conditions.
Settings Contents
This option automatically adjusts image brightness
Auto
according to the environmental light conditions.
You can adjust the brightness of an image manually.
Manual Adjust the brightness when the subject is too bright or
too dark.
Setting the exposure manually:
When manually setting the exposure, the default
setting appears as the value is automatically adjusted
according to the environmental light conditions.
Touch decrease ( ) or increase (
adjust the exposure while viewing the image on the
LCD sceen. The adjusted value is applied right after
touching ( or ) tab.
- Exposure value can be set between "0" and "29."
59_ English
On-screen
display
None
21
Exposure
) tab to

录制一个主题可以在室内各种照明设备的环境下进行。（自然光，荧光
灯，钨丝灯等。）。因为在不同光源下的色温有所不同，所以白平衡设
置后会有不同的色彩。使用本功能会得到更自然的效果。
 在设置白平衡之前，请将"Digital Zoom: Off"(数字变焦：调整为关)。
(第67页)
 不能使用带有颜色的物体设置白平衡。否则设置的色彩将会不自然。

在EASY Q模式下，此功能将被设置为"Auto"(自动)。
 如果照明条件被改变，请重新设置白平衡。
 一般的户外录制，设置到自动也许会获得更好的效果。
Exposure( 曝光 )
本 DVD 摄像机通常会自动调节曝光。根据录制的条件，您还可以手动调
节曝光。
设置
Auto( 自动 ) 根据照明环境，会自动调节图像亮度。
您可以手动调节图像亮度。当被摄主题过亮或者过
Manual( 手动 )
暗的时候调整亮度。
手动设置曝光：
当手动设置曝光时，根据周围环境的亮度，默认设置
的参数会自动显示在屏幕上。
21
通过 LCD 显示屏查看图像时，触摸减小 (
( ) 导航进行调整曝光。运用 (
航后确定被调节的参数值。
- 可以设置的曝光参数为从"0"至"29" 。
内容 屏幕显示
无
21
) 或增大
或
中文 _59
) 导