Installation Requirements; Location Requirements; Clearances And Dimensions - Samsung NX58J7750S series Installation Manual

Installation requirements

Location requirements

Clearances and dimensions

NOTE
For OTR over Gas Stove, please follow local
GAS CODE.
BEFORE YOU BEGIN to install this appliance,
refer to the following information,
dimensions, and clearances. Do not
locate the range where it may be subject
to strong drafts. Provide adequate
clearances between the range and adjacent
combustible surfaces. These dimensions
must be met for safe use of the range.
The location of the electrical outlet and
gas piping may be adjusted to meet the
following dimensions and clearances.
For installation in Canada, a free-standing
range is not to be installed closer than 4.7 in
(12 cm) from any adjacent surface.
Side
Clearance
Above
Cooking
Surface to
Wall
36 in
(91.4 cm)
Cabinet
Install_NX58J7750S _AA,AC_DG68-00624A-03_EN.indd 17
30 in
(76.2 cm)
6 in
4 in
(15.2 cm)
(10.2 cm)
24 in
(61 cm)
Lower
Depth
CAUTION
This range has been designed to comply
with the maximum allowable wood cabinet
temperature of 194 °F (90 °C). Make sure
the wall covering, countertops, and cabinets
around the range can withstand the heat (up
to 194 °F [90 °C]) generated by the range. If
not, discoloration, delamination, or melting
may occur.
13 in (33 cm)
Overhead
30 in (76.2 cm)
18 in
(45.7 cm)
0 in (0 cm)
Clearance
Below
Cooking Top
and at Rear
and Sides of
Range
Cabinet
Depth
0 in
(0 cm)
English 17
2015-08-07 10:24:45