Samsung NX58J7750S series Installation Manual page 23

Installation requirements
Usage situations where appliance
power cord will be disconnected
frequently
Do not use an adapter plug in these
situations because disconnecting of the
power cord places undue strain on the
adapter and leads to eventual failure of the
adapter ground terminal. Where a standard
two-prong wall receptacle is encountered, it
is the personal responsibility and obligation
of the customer to have it replaced with
a three-prong (grounding) receptacle by
a qualified electrician before using the
appliance.
Power cord location
22 English
Install_NX58J7750S _AA,AC_DG68-00624A-03_EN.indd 22
Additional installation requirements
for mobile homes
The installation of appliances designed for
mobile home installation must conform
with the Manufactured Home Construction
and Safety Standard, Title 24 CFR, Part
3280 (formerly the Federal Standard for
Mobile Home Construction and Safety,
Title 24, HUD, Part 280) or, when such
standard is not applicable, the Standard
for Manufactured Home Installations,
latest edition (Manufactured Home Sites,
Communities and Set-Ups), ANSI A225.1,
latest edition, or with local codes. In
Canada, mobile home installation must be in
accordance with the current CAN/CSA Z240/
MH Mobile Home Installation Code.
Power cord location
The power cord for this appliance is located
on the back of the range, near the bottom
right hand corner. The 53-in (135-cm) power
cord will come installed on the range and
taped to the back for shipping.
2015-08-07 10:24:45