EMpTYing ThE dusT bin
You should clean the Aqua cyclone after each vacuuming. Be sure to clean
the vacuum over a sink or other basin to keep your floor and carpets. To
clean the Aqua cyclone, do the following.
1. Lift the cover lock and
open the cover to take
the aqua cyclone out of
the main body.
4. Rinse the full set of aqua cyclone.
5. Use the cleaning brush
if it is needed.
Downloaded From Vacuum-Manual.com Manuals
2. Place the aqua cyclone
on the flat table. Hold
the lever up and
separate the upper part
completely.
6. Let the full set of aqua
cyclone fully dried in the
shade.
3. Throw the dust away to
a bin, plastic bag.
7. Put the assembled
cyclone into the main
body.
maintain _11