Samsung VC-6000 SERIES Operating Lnstructions
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Vacuum Cleaner
  5. VC-6000 SERIES
  6. Operating lnstructions
Samsung VC-6000 SERIES Operating Lnstructions

Samsung VC-6000 SERIES Operating Lnstructions

Hide thumbs Also See for VC-6000 SERIES:
Table of Contents

Advertisement

Quick Links

Download this manual
Operating lnstructions
For household use only
Models
VC-6000 SERIES

VACUUM CLEANER

❈ Before operating this unit, please read the instructions carefully.

Advertisement

Table of Contents
loading

Related Manuals for Samsung VC-6000 SERIES

Summary of Contents for Samsung VC-6000 SERIES

  • Page 1: Vacuum Cleaner

    Operating lnstructions For household use only Models VC-6000 SERIES VACUUM CLEANER ❈ Before operating this unit, please read the instructions carefully.

  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. WARNING To reduce the risk of fire, electric shock, or injury: 1. Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing. 2.

  • Page 3: Identifications Of Parts

    IDENTIFICATIONS OF PARTS HANDLE AIR REGULATOR SUCTION HOSE DUST-FULL INDICATOR TUBE* CORD REWIND BUTTON BUTTON FOR SUC- POWER CONTROL SWITCH* TION HOSE REMOVAL ON/OFF BUTTON CARRYING HANDLE CLAMPER FOR DUST BAG RUG/FLOOR COMPARTMENT SELECTOR FLOOR NOZZLE* Features marked with * may vary according to model. ASSEMBLING THE VACUUM - CLEANER READY FOR USE 2) Connect the suction tubes together 1) Connect the suction hose to the suction tube.

  • Page 4: Power Cord

    POWER CORD 1) PULLING OUT The power cord is long enough to be drawn out for convenience. 2) REWINDING When you have finished cleaning, disconnect the plug from the electrical outlet and simply press the cord rewind button lightly with your toe.

  • Page 5: Dust-Full Indicator

    DUST-FULL INDICATOR If the “Dust-Full” indicator changes to “RED” while you are cleaning, the dust bag requires replacement. NOTE : If the “Dust-Full” indicator continues to display “RED” even after changing the dust bag, turn the cleaner off and check whether the hose, tube or nozzle is clogged.

  • Page 6: Using The Blower

    USING THE BLOWER Located on the left rear side of the cleaner. 1) Disconnect the hose from the body of the cleaner. 2) Connect the hose clamper to the blow hole. PARK POSITION Located in the top rear side of the vacuum-cleaner, there is a nozzle support that can be used to park the nozzle during pauses in cleaning.

  • Page 7: Replacing The Dustbag

    REPLACING THE DUST BAG 1) To open the dust cover of the dust bagcom- 2) Remove the carrying bag from the cleaner. partment, press the clamper upward. (The clamper is located at the front of the dust cover) 3) After removing the used dust bag, insert the 4) Press the dust cover down gently until the cardboard bag collar of the new dust bag clamper relocks.

  • Page 8: Maintenance Or Replacement Of The Filters

    MAINTENANCE OR REPLACEMENT OF THE FILTERS 1) INLET-FILTER. • Open the dust cover. • After detaching the filter, wash it lightly withwater, dry it in the shade, and then insert it in its original position. • Close the dust cover. 2) OUTLET-FILTER.

  • Page 9: Troubleshooting

    NOTE : For optimum efficiency, clean floor brush with crevice tool. TROUBLE SHOOTING PROBLEM CAUSE REMEDY Motor does not start. No power supply. Check cable, plug and socket. Suction force is gradually Filter, nozzle, suction hose Remove the object. decreasing. or tube is blocked.
  • Page 10 DJ68-00097S REV(0.0)

Table of Contents