Furuno 1835 Installation Manual page 28

3.2 How to Set the Purpose
Set the purpose of the radar.
1. Press the MENU key. The main menu appears on the screen.
2. Press or on the cursor pad to select [Factory]. The factory menu title bar appears in gray
on the right of the screen.
3. While you press the CANCEL/HL OFF key, press the MENU key five times to activate the
Factory menu.
Menu Menu
Target
ARPA
AIS
GPS
System
Initial
Tests
Sector Blank
Units
Installation
Factory
*: The model name depends on your radar model.
4. Press the ENTER key. The Factory menu becomes active and the cursor moves to the right
column.
5. Press or to select the Purpose.
6. Press the ENTER key to show the setting window.
7. Press or to select an option.
8. Press the ENTER key to validate the setting.
9. Press the CANCEL/HL OFF key to return to the main menu.
3-2
Language
Purpose
Model
[ENTER]: Enter [CANCEL/HL OFF]: Back
[MENU]: Exit
Do not change the model name.
River
Sea
IEC
Russian-River
Factory Factory
: English
: Sea
: 1835 RTR-057A*